Best TIG Welders Reviews

A TIG machine carries quite a price if you’re unsure what you really need. We waded through a crowd of machines to find the 10 best TIG welders.

Best Plasma Cutters – Reviews and Top Picks

Metal cutting can be one of the most tedious and expensive tasks in fabrication.

Plasma cutters work more efficiently, making clean cuts with less heat and more precision, using a plasma torch.

Inverter technology has lowered the costs of plasma cutters. However, serious plasma cutters are still expensive.

You need a high quality air plasma cutter best suited to cutting thick metal precisely. It has to be energy efficient without costing way too much.

We’ve found 5 of the best models on the market to help you make sure you find the best plasma cutter.

#1. Yeswelder TIG-250P AC/DC TIG Aluminum Welder With Pulse

  • 10-165 amp TIG
  • 5-250 amp stick welder
  • 2T/4T trigger lock
  • AC square wave
  • AC/DC pulse TIG

The YesWelder TIG-250P AC/DC TIG Aluminum Welder With Pulse is an AC/DC TIG featuring pulse modulation for removing oxidation on the surface. This feature also keeps impurities out of the weld puddle. This machine features digital settings except for the amperage level, which is an infinitely adjustable analog type. YesWelder designed this welder to dynamically adjust the settings while you weld, maintaining a consistent arc.

The TIG-250P also incorporates a 2T/4T trigger lock to reduce hand fatigue when making long welds like metal ducting seams. Some owners don’t like the feel of the torch button, complaining that it’s stiff to press and hold. The YesWelder TIG-250P AC/DC TIG Aluminum Welder ships with a 5-pin metal foot pedal that addresses this problem.

As an AC machine, this machine can weld aluminum without any real issues. Some owners feel that YesWelder should have included a gas regulator with this model like the similar Eastwood TIG200. The YesWelder TIG-250P AC/DC TIG Aluminum Welder includes square wave mode, a spot welding timer and “dirty power” capability that makes it generator friendly, something not offered by the Eastwood TIG200.


  • Flip-up front panel dust cover
  • Automatically saves your settings
  • WP26 TIG torch
  • Anti-sticking feature
  • Includes a foot pedal heat control


  • No regulator included
  • TIG torch is cheap quality

#2. Eastwood TIG 200 AC/DC TIG Welder

  • Square wave inverter
  • DC and AC TIG welding
  • Dual 120/240 input power
  • Welds up to ¼-inch plate
  • 3-year warranty

The Eastwood 200 is a favorite source for automobile restoration shops. It’s well known for body and paint tools, metal working machinery, blasting cabinets, body hammer sets and heavy tools for frame-off restoration work. The Eastwood TIG 200 welder is heavier-duty than usually seen from equipment targeted at small shops and DIY crafters. The ability to weld in AC gives you the capability for aluminum welding.

With dual 120/240 input power, digital display and a 60 percent duty cycle at 90 amps, the TIG 200 offers more than most TIG welders in its price range. It’s a true AC/DC TIG welder with high frequency no-touch arc control, capable of welding up to ¼-inch plate steel. With an industry standard WP-17 torch setup, it uses easy to find replacement parts.

The pedal control was mentioned frequently by users as something they didn’t like about this welder even though they love the machine’s welding capabilities. It’s a standard piece that can be replaced easily to get the performance you want. Eastwood was smart enough to include preflow and postflow gas metering to put the shielding in place before and after the welding is active. This makes for higher-quality welds without porosity and oxidation. The Eastwood TIG 200 comes with a 3-year warranty.


  • High frequency pilot arc
  • Duty cycle 60 percent at 90 amps
  • WP-17 torch is the industry standard
  • Preflow-postflow for cleaner welds
  • 12-foot torch connection


  • Users don’t like the foot pedal
  • Cheap quality flow meter

#3. Lincoln Electric 200 AC/DC TIG Welder

  • Dual voltage 120/240 input
  • AC/DC processes
  • 10 to 200 amp range for TIG
  • Ready to weld aluminum
  • Industrial build quality

The Lincoln Electric Square Wave TIG 200 is a 200 amp portable TIG welder for hobbyists, craftsmen, artists and small fabricators. It’s easy for beginners with advanced features to take advantage of as experience grows.

This is an AC and DC machine, welding from 24-gauge sheet up to 3/16-inch plate. For aluminum, the AC TIG process on this machine has a pulse signal system for smooth filler metal deposition, yielding more beautiful work. Pulse modulation offers the ability to clean the weld puddle as it goes. It’s also got adjustable AC frequency for adjustable bead width.

An easy settings interface, 40 percent duty cycle and dual 120/240 input voltage make for a convenient welding machine that can be used anywhere. Lincoln Electric offers a 3-year warranty for this welder. There are some reports of this welder failing in the shop without much use, so a good warranty offers some peace of mind.

The Square Wave TIG 200 comes with a foot pedal, a flow meter-type gas regulator, a TIG torch and a 10-foot hose.


  • 20 pulses per second for heat control
  • AC balance control for TIG cleaning
  • High frequency no-touch arc starting
  • Includes a foot controller
  • Comes with a nice regulator


  • Quality control is inconsistent
  • Runs on foot pedal only

#4. Primeweld TIG225X AC/DC TIG Welder

  • Pulse Width Modulation
  • Inverter powered
  • High frequency arc starting
  • Includes regulator
  • Duel input: 110v & 220v

Primeweld’s TIG225X TIG welder offers the most versatile and easy to use mix of features available on an AC/DC TIG welder in this price range. Inverter based high frequency starting with pulse width modulation delivers a 10/90 pulse ratio from 10 to 225 amps, an incredibly wide amperage range for its class. A 200 hertz pulse frequency makes for a smooth TIG welder and adds true TIG ability for using one side of the AC cycle to clean the weld puddle. This machine has a 100 percent duty cycle at 108 amps, enough power output to weld continuously on ⅛-inch metal. It has a 40 percent duty cycle at full power rating.

Primeweld backs the TIG225X AC/DC TIG with a 3 year warranty and highly rated US-based customer service. The TIG225X ships with a metal foot control, a regulator and the much-loved CK17 American made torch with flex lines. This provides for an upgrade to water cooling by purchasing the optional CK20 water-cooled torch and water cooler from PrimeWeld.

The TIG225X is dual 120/240 volt input capable and offers lots of versatility, with a stunning array of adjustments on the front panel. 225 amps can weld ½-inch metal plate and 10 amps can get you all the way down to 24 gauge sheet metal. Owners rave about the welding quality with this machine and PrimeWeld is known for its amazing old-fashioned customer service. Users report excellent packaging and this machine comes with a nice selection of parts and accessories, though some owners have had issues with the included flowmeter. PrimeWeld has stood behind its product and solved these issues for owners that have encountered it.


  • Has a CK17 US-made torch
  • Includes metal foot pedal
  • Extra wide 10 to 225 amp range
  • 200 hertz pulse frequency
  • 3 year warranty


  • Costs more than others in its class
  • Some complaints about flowmeter

#5. Miller Electric Maxstar STR TIG Welder – Best Overall

  • 1- and 3-phase input voltage
  • Uses any power source from 110 to 480 volts
  • Memory card data port
  • Updatable software
  • Sleep timer powers down idle machine

The Miller Electric Maxstar STR 210 TIG Welder with High Frequency lift start is one of the newest additions to the Miller TIG welding lineup, designed for professional DC TIG welders for stainless and mild steel. DC can work for welding aluminum, but it’s a welding process not often done in production environments, because careful cleaning and helium/argon mix add too much expense. The MaxStar can provide the means to do it if called on, however.

The MaxStar has a standby power switch on the front panel to put the machine into sleep state, conserving power when it’s not welding. Miller’s TIG Pro-Set system provides factory presets to get you up and running quickly. The wireless remote means the Miller Maxstar STR210 TIG Welder is easy to use from 300 feet away without having to walk all the way back to where it’s stationed just to make adjustments. This is just one more feature designed for industrial use on this amazing TIG welding machine.

Our top pick, the Miller Electric MaxStar 210 STR is a great value, featuring a wide amperage range with improved low amperage operations, allowing much smoother control when welding sheet metal. A memory card port lets you save settings between machines. Auto-Line multi-voltage input, 100 percent duty cycle at 175 amps and Miller’s 3-year warranty earned the MaxStar 210 our Premium Pick.a


  • Among the top AC/DC TIG welders in its class
  • High frequency arc starting
  • Settings memory makes it easy to use
  • 10 amp low end welds thin sheet metal
  • 100 percent duty cycle at 175 amps


  • Doesn’t include a TIG torch
  • DC processes only

#6. ESAB Rebel 215ic DC TIG Welder

  • Flux core, MIG and TIG
  • Large display screen
  • 3-year warranty
  • Dual 120/240 volt input
  • Heavy duty weatherproof case

The ESAB Rebel EMP215ic TIG welder is designed to IPS23 standards for outdoor duty. The case is built to industrial standards for all-weather use. It’s got dual 120/240 volt input, 40 percent duty cycle and is one of few multi-process TIG welders that do both MIG and TIG in addition to flux core, but it’s not AC/DC power output.

ESAB equipped the Rebel 215 with a big, high resolution digital display for settings that’s also got the user manual and parts list loaded into it. This easy to use machine lets you save four presets for each welding process. There’s a 2T/4T switch with a trigger lock for long welds to save hand fatigue.

ESAB’s Smart MIG technology adapts to individual styles, making small incremental improvements to the machine settings as you go. There’s also an automatic settings feature where you input wire diameter and plate thickness and the machine processor sets up for you. This feature has an override for experienced welders and special situations.

The Rebel 215 carries a 3-year warranty, ships with Tweco MIG and TIG torches, and has a Victor regulator.


  • User manual on the display
  • Includes MIG gun and TIG torch
  • Comes with a gas regulator
  • Automatic settings with override
  • On-board parts list


  • DC TIG welder only
  • This one is pricey

#7. Everlast 255EXT AC/DC TIG Welder

  • Dual 120/240 input power
  • TIG 240v duty cycle 100 percent at 200 amps
  • Multiple AC wave forms
  • 2T/4T torch trigger lock switch
  • DC and AC TIG welding

The Everlast is a DC and AC TIG pulse welder with dual 120/240 volt input power with a 100 percent duty cycle at its rated power. It features gas preflow and postflow, which starts the shielding gas just before the arc strikes and then waits until after the arc is off before shutting off the gas. This keeps the weld cleaner and means less chance of porosity in the weld bead.

Everlast gave this electric TIG Welder multiple AC waveforms, which let you fine tune the arc characteristics for TIG aluminum welding. Home workshop welders might never need to decide between true sine, two kinds of square sine or triangular waveforms. However, it’s nice to have the ability when your welding skills advance to the point where it’s useful.

The Everlast PowerTIG 255EXT is also equipped with a digital display, settings memory and microprocessor-powered easy setup parameters. The high-frequency no-touch arc start means avoiding any contamination of the tungsten electrode. There’s a stitch weld timer for doing spot welds and the Everlast PowerTIG welding machine comes with a 5-year warranty on this machine. 3 amp to 200 amp range lets you weld from 24-gauge sheet up to 3/8-inch plate.


  • High frequency and lift arc start
  • Pulse modulation frequency up to 500 hertz
  • Gas preflow and postflow for better shielding
  • AC balance control for weld puddle cleaning
  • 240 TIG power 3 amps to 250 amps


  • Water cooled torch, but no water cooler
  • Reports of HF board failure

#8. Weldpro Digital TIG 200GD AC/DC TIG Welder

  • 120/240 volt dual power
  • 2T/4T hold switch
  • Wide 10 to 200 amp range
  • Comes with a foot pedal
  • Angled control panel

The Weldpro Digital TIG 200GD TIG Welder is an easy to use TIG welder that runs on dual 120/240 volt input power and has both DC and AC TIG with 200 hertz pulse width modulation for variable bead width. The adjustable AC balance goes from 30 to 70 percent and cleans aluminum oxidation while delivering good weld penetration.

The Weldpro Digital is equipped with a CK17 torch with a flex head that uses standard American parts. There are quite a few complaints about quality issues with the heat control pedal. The Weldpro Digital TIG 200GD features a 2T/4T switch that works as a torch lock. This lets you make long bead runs without needing to hold the torch trigger down while MIG welding.

These TIG welders offer a wide 5 to 200 amp TIG AC range when using a 240 volt power source. There’s up to 140 amps on 120 input. The AHP AlphaTIG 200X includes a high-frequency no-touch arc start, keeping contamination away from the tungsten electrode.

The Weldpro Digital TIG 200GD has a digital display and it’s backed with a 2-year warranty and includes MIG and TIG torches, a regulator and an electrode clamp.


  • High frequency pilot arc
  • 200 hertz pulse modulation
  • Preflow/postflow for cleaner welds
  • AC and DC welding
  • AC balance for cleaning oxidation


  • Pedal isn’t high quality
  • Reports of non-working current knob

#9. Amico TIG-160DC TIG Welder

  • Dual 120/240 volt input power
  • High frequency TIG torch
  • IGBT inverter technology
  • 1-year warranty
  • Optimized arc starts

The Amico TIG-160DC is a low cost, dual input 120/240 volt welding machine that plug into any common power supply. Rated to 160 amps DC power when running on 240, it’s also capable of DC stick welding as well. The 60 percent duty cycle at 220 amps is pretty impressive for any machine in this price range. Another impressive feature on the TIG-160 is the high frequency lift-type arc start.

This is an inverter-powered welder, making for a light, powerful package. The Amico TIG-160DC is equipped with a forced fan setup to keep things running cool longer, one of the reasons it has such a good duty cycle at max power. This machine comes with a 13-foo torch lead. The electrode clamp and grounding clamp connections are each 10 feet long.

Amico ships the TIG-160 with an 8-foot argon hose and a 120 volt adapter to allow plugging into 20-amp household current. Some users weren’t happy with the lack of a gas regulator, but it’s not uncommon for machines in this price range to ship without one. The Amico TIG-225 comes with a 1-year warranty.


  • 15-220 amps working range
  • Runs on “dirty power” fluctuations
  • Light 16-pound weight
  • 60 percent duty cycle at 220 amps
  • 13-foot torch connection


  • Doesn’t include a gas regulator
  • Doesn’t weld aluminum

#10. Mophorn TIG-200 TIG Welder


  • TIG machine or arc welder
  • Infinitely adjustable amperage knob
  • Amperage range 20 to 200 amps
  • Dual input voltage 120/240
  • Compensates for power fluctuations


The Mophorn TIG-200 welder is our Budget TIG welder in this roundup because for the money, there’s a lot to like here. Dual 120/240 dual voltage input power, 60 percent duty cycle and 200 amp power output on a machine in this price range is simply amazing.

It also offers the ability for either TIG or stick welding process, a wide 20 to 200 amp TIG operating range, hot start and an infinitely adjustable analog amperage control.

One significant disadvantage is the lack of a pedal control. The TIG-200 uses a fingertip control instead. Unfortunately, it does not accept any available pedal system, either.

This isn’t a deal-breaker given the price, but just think about it. The TIG process already takes a hand to use the torch and a hand to feed welding rod into the puddle. An added hand control doesn’t make a difficult job any easier. The foot pedal has its place in TIG work.

With that said, users reported smooth welding and many were amazed at the price vs. performance value of this TIG machine.


  • Simply flip switch for TIG or stick
  • 8-foot torch lead
  • Only weighs 20 pounds
  • Inverter powered
  • Lift-type arc starting


  • Hand controller only, no foot pedal
  • Reports of faulty overheat protection

Our TIG Buying Guide

Whenever you’re shopping for the best TIG welder, the main factors that should determine your choice are:

  1. What types of projects will you do the most?
  2. What specific functions do you need?
  3. What is your budget?

What Types Of Projects Are You Planning To Do?

TIG welding is most suitable where bead appearance is important, like in bicycle frames or on truck bumpers, lawn furniture and the like. It also is the most appropriate way to weld very thin sheet metal, because stick and MIG processes put too much heat into the metal and result in burn-through.

Aluminum and stainless steel are the other main places where using a TIG welder is the best way to get the work done, because of its penetration and lack of contaminants in the weld.

What Kinds Of Functions Are Required For Your Work?

Although it’s possible to weld aluminum with DC current, you will frequently see the rule that you must use AC output to weld aluminum. One reason for this is that AC welding allows the use of high-frequency pulses that keep the weld puddle clean. Another reason is that a primary advantage of TIG welding is heat control, a highly important factor in welding aluminum.

Options to look for in regard to available functions are AC vs DC capability, plasma cutter, ability to select the AC waveform, for example square wave or true sine wave and an adjustable pulse rate.

Multi-Process Machines Offer More Functions for Your Money

A multi-process welder can give you more versatility for the same money. Sometimes they can offer MIG or plasma cutter ability along with TIG.

How Much Can You Spend on Your Machine?

In the end, there are enough functions and technology choices available when buying a TIG to drive welder costs to the same level as building a house.

It’s important to decide what functions and equipment are most important and staying under your final number to find the best TIG welder for the money. Don’t forget to take the length of the warranty into account.

What To Look Out For

Some equipment is essentially necessary, such as a foot pedal to control heat or a flow meter-type gas regulator.

Does the TIG welder you’re looking at include these items?

Will you need to buy higher-quality pieces to get the real potential out of the welder?

Check The Duty Cycle Rating

Check the duty cycle rating of the welding machines and the output power they’re rated at for that percentage.

Duty cycle is the percentage of 10 minutes in which the welder can operate continuously before overheating.

A 40 percent duty cycle means you can weld for 4 straight minutes at the rated power. That’s actually quite a long time to weld continuously. You will find that the more expensive American machines seem to have much lower duty cycle ratings than the less-expensive Chinese-built welders even though they cost more.

Remember the old adage about something seeming too good to be true.

This has to do with ratings methodology and the fact that the expensive big-name companies are more cautious because their equipment is used by professionals on long shifts over years in tough environments.

Gas Cylinders

Don’t forget to budget in gas cylinders, the cost to fill them and optional but important parts like water cooling.

This Is The Big Leagues

TIG welding is a big step up from basic welding skills, and TIG machines cost a lot more than other welders, offering obscure features not found on other machines. Educate yourself at welding forums and manufacturer’s websites on what terms and functions mean before spending your money on something you don’t even need.

With those factors taken into account, we believe the Miller MaxStar STR is the best TIG welder as it offers the most bang for the buck and it is designed for professionals in mind. Features like memory card storage, wireless remote control, Miller’s legendary customer service and the lengthy warranty are some of the big reasons why we selected the MaxStar as our Pro Choice in this guide.

If you are not a professional, then both the YesWelder TIG-250P and the Eastwood TIG200 offer AC/DC TIG, stick welding, a nice selection of features, quality and power at affordable pricing. Both include foot pedals and a wide range of settings as well.

The YesWelder TIG-250P is almost entirely digital, so if that’s something that bothers you, the Eastwood TIG200 features a wide range of analog settings. The YesWelder’s main advantage over the Eastwood TIG200 is that it’s generator-friendly with its tolerance for power fluctuations.

We will be happy to hear your thoughts

Leave a reply

Best Home Goods Online Store Reviews & Buying Guide
Enable registration in settings - general